TILTA Full Camera Cage f BMCC Tactical Package Tactical Grey

Tuotetunnus (SKU): 60005157

609,00 sis. alv

Maahantuojalla: Toimitusaika 2-4 päivää

Toimituskulut alk. 6,90€

Ei varastossa, vain jälkitoimituksena

Paino (g)



Näytä enemmän


Top Handle:

Cold shoe features a locking pin to help secure your accessoriesQuickly and easily attaches to the top of the cage.

The quick release top handle easily and securely attaches to the top of the half and full Tiltaing camera cages. It provides several 1/4”-20 and 3/8”-16 mounting points as well as one cold shoe mounting point on the front and one on the back of the handle.

Full Cage:

Features three cold shoe mounting points to allow you to attach multiple accessories such as a microphone, SSD holder, and top handle.

The full camera cage provides complete protective armor for the BMPCC 4K/6K camera body while providing several 1/4”-20 and 3/8”-16 mounting points as well as three cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

15 mm LWS Baseplate Type I

This 15mm LWS baseplate easily slides onto the base of the Tiltaing half and full camera cages. It provides 15mm LWS rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.

Tactical Finish:

The camera cage and top handle both feature the same unique finish that allows you to have a firm grip on your camera.

Included Allen Key:

The Allen key slot is sleekly integrated into the cage’s design and avoids blocking the battery port as well as the camera’s fan. Holes on the bottom of the cage allow for easy adjustments when balancing the camera onto gimbals. The bottom of the cage has two dovetail slots. These allow you to attach the side handle and baseplate simultaneously.

Original Integrated Design:

Rugged and compact, the unique USB-C cable features an L-shaped design to securely attach to the camera cage and SSD drive. The customised HDMI adapter also features an L-shaped design to securely attach to the camera cage.

Modern Ergonomic Design:

Features a SAMSUNG T5 SSD card slot which makes the side handle a fully integrated unit that has power and control functionality. Also features a leather hand strap to allow you to securely operate your camera.

BMPCC 4K/6K 15mm LWS Baseplate:

The top section features a dovetail-like design to allow you to easily slide the plate on and off the cage. The bottom is compatible with the Tilta standard lightweight dovetail plate.

Packing list:
• 1x Full Camera Cage for BMPCC 4K/6K(TA-T01-FCC)
• 1x Side Power Handle Type I (F570 Battery) -Tilta Gray (TA-SH4-57-G)
• 1x Quick Release Top Handle(TA-QRTH)
• 1x 15mm LWS Baseplate(TA-BSP-15)
• 1x SSD Drive Holder for T5(TA-SSDH-T5)
• 1x 90-Degree USB-C Cable (20cm) (CB-USBC-20)
• 2x 15x200mm Rods – Black (R15-200-B)
• 1x Half Sunhood(TA-T01-HSH)
• 1x 12V Micro DC Male to BMPCC 4K/6K Power Cable(TCB-BMPC-DCM12)

Technical data:
Compatibility Blackmagic Pocket Cinema Camera 4K/6K
Material(s) Aluminum-alloy, stainless steel


Paino 7 kg

Nopea toimitus!

Toimitus jopa saman päivän aikana


Alkaen 6.90€

Ammattilaisen valinta

Henkilökohtainen palvelu

Kotimainen yritys

Ammattilaisten tukena vuodesta 2006